Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Technician
    Join Date
    Mar 2013
    Posts
    20
    Rep Power
    10

    Unhappy Pro 1107EX always waste toner is full even it's empty

    Hello Guys, we need your advice regarding my problem on our office copier, always showing "waste toner is full" message, while printing the logs we got also SC495 and SC334.
    We appreciate your helpful comments. Thanks.




    Never ending story with this copier.. "%/('#!


  2. #2
    Service Manager 10,000+ Posts
    Pro 1107EX always waste toner is full even it's empty

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    141

    Lightbulb Re: Pro 1107EX always waste toner is full even it's empty

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com



  3. #3
    grumpy old git 500+ Posts banginbishop's Avatar
    Join Date
    Oct 2007
    Posts
    885
    Rep Power
    32

    Re: Pro 1107EX always waste toner is full even it's empty

    are you trained on it or an end user?


  4. #4
    AutoMajical Resolutionist 2,500+ Posts
    Pro 1107EX always waste toner is full even it's empty

    Tonerbomb's Avatar
    Join Date
    Feb 2005
    Location
    Bugaha
    Posts
    2,584
    Rep Power
    78

    Re: Pro 1107EX always waste toner is full even it's empty

    This isn't something the end user can deal with! You need a Service Call !!!

    Mystic Crystal Revelations

  5. #5
    Technician
    Join Date
    Mar 2013
    Posts
    20
    Rep Power
    10

    Re: Pro 1107EX always waste toner is full even it's empty

    Already replaced the toner coil and tube, cleaned the waste toner sensor, checked the coil out in waste toner. everything is ok, but toner pump and hose are not yet checked. Any advise again? thanks.

    Already have service and parts manual.


  6. #6
    Trusted Tech 50+ Posts Konicoz's Avatar
    Join Date
    Jun 2013
    Location
    Australia
    Posts
    62
    Rep Power
    10

    Re: Pro 1107EX always waste toner is full even it's empty

    The waste toner coils are normally to blame, especially the lower one. If you have replaced them you should be able to see all the gears and the coil turning with the back covers open while everything is clean- if not the coil has broken off the shaft or the drive gear is broken. I put in a stronger spring in the waste toner agitator guide that leads to the coils for good measure - that keeps the toner from clumping up and prevent the problem reoccurring . Also check the sensors that they are all clear of toner as this will give you that error too. Make sure the waste toner drops freely to the waste bottle. Good luck SC 495 is legendary

    Hey what ya doing? - just screwing around.

  7. #7
    Technician
    Join Date
    Mar 2013
    Posts
    20
    Rep Power
    10

    Red face Re: Pro 1107EX always waste toner is full even it's empty

    Toner coil cleaning works on several days and when the problem occurs again we disable the waste toner sensor with SP codes. Toner Consumption counter turn off, and the message did not appear again. SC495 was solve when we try to run output check of toner supply and locked the stand.


  8. #8
    Just a fellow wanderer 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,756
    Rep Power
    80

    Re: Pro 1107EX always waste toner is full even it's empty

    If that machine is anything like the Pro 907 EX, there is a second waste toner bottle behind a cover underneath where the toner supply is. If you haven't checked that yet, if time permits you might want to see if that's the case for your machine.


  9. #9
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    7,066
    Rep Power
    152

    Re: Pro 1107EX always waste toner is full even it's empty

    Quote Originally Posted by Iowatech View Post
    If that machine is anything like the Pro 907 EX, there is a second waste toner bottle behind a cover underneath where the toner supply is. If you haven't checked that yet, if time permits you might want to see if that's the case for your machine.
    That is not a second waste toner. It is the waste toner bottle bottle. The bottle below the development unit is the vacuum collection bottle. It should be replaced at 3 Meg. The air pump above it should be replaced at 2.5 Meg. The two of them work together to keep pressure from building up inside the development unit and causing toner hazing. It is exactly like the 907EX other than being 10 ppm faster.


  10. #10
    Just a fellow wanderer 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,756
    Rep Power
    80

    Re: Pro 1107EX always waste toner is full even it's empty

    Quote Originally Posted by slimslob View Post
    That is not a second waste toner. It is the waste toner bottle bottle. The bottle below the development unit is the vacuum collection bottle. It should be replaced at 3 Meg. The air pump above it should be replaced at 2.5 Meg. The two of them work together to keep pressure from building up inside the development unit and causing toner hazing. It is exactly like the 907EX other than being 10 ppm faster.
    Thanks!
    I guess that is one reason why the Pro series are not just big LD360s. Guess I'll have to hit the manuals before I go back to them.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here