Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2007
    Posts
    100
    Rep Power
    0

    spc 232 sf over exposing during copying

    Good evening, I have recently been suffering from this machine overexposing when copying only. prints are great, have tried all sorts to no avail, this accompanied by a continual request for the density sensor to be cleaned. Have tried everything with this from unit replacement to deep cleaning and density adjustments available, have now reached the point where we will have to purchase the engine pcb, but would like to hear if any of outstanding engineers have had the faults resolved, many thanks for your time.

  2. #2
    Professional Moron 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Location
    Shitsville, UK
    Posts
    3,852
    Rep Power
    108

    Re: spc 232 sf over exposing during copying

    Don't bother ordering an engine board, these rarely fail. A slightly more drastic measure is to initialise the engine EPROM then do the line position and registration adjustments in service mode and user tools. Be aware though, this will zero the meters.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here