Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts
    Join Date
    May 2012
    Location
    port-louis
    Posts
    126
    Rep Power
    26

    Ricoh SP3400N : All indicators are lit and printer won't work

    Photo0619.jpgSP3400N.jpg

    Please advice
    Last edited by brunot; 09-29-2013 at 11:13 PM.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Ricoh SP3400N : All indicators are lit and printer won't work

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: All indicators are lit and printer won't work

    For those of you not interested in guessing, this is a Ricoh SP3400N printer.

    Have you looked at the manual yet? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 100+ Posts
    Join Date
    May 2012
    Location
    port-louis
    Posts
    126
    Rep Power
    26

    Re: All indicators are lit and printer won't work

    There's nothing like this in the Troubleshooting Guide



    Quote Originally Posted by blackcat4866 View Post
    For those of you not interested in guessing, this is a Ricoh SP3400N printer.

    Have you looked at the manual yet? =^..^=

  4. #4
    Service Manager 2,500+ Posts
    Ricoh SP3400N : All indicators are lit and printer won't work

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: All indicators are lit and printer won't work

    Quote Originally Posted by brunot View Post
    There's nothing like this in the Troubleshooting Guide
    Really? I've never laid my eyes on one of these printers, yet I found this in about 6 seconds at Knowledge Base - Support Center | Ricoh-USA


    Panel Indicator

    Indicator patterns Cause
    All indicators are lit. There are problems with the printer. Check the printer status on the Smart Organizing Monitor dialog box.
    After checking the printer status, turn off the main power, and then turn it back on again.
    If all the indicators are still lit, contact your service representative.

  5. #5
    Senior Tech 100+ Posts neergish's Avatar
    Join Date
    Feb 2008
    Location
    A little bit to the left of the centre of the known universe.
    Posts
    177
    Rep Power
    34

    Re: Ricoh SP3400N : All indicators are lit and printer won't work

    Load Smart Organising Monitor for 3400 series onto the machine you print from and see if there is a particulair error message.
    "See if you can rent a spring hook and a phillips screwdriver it will make your life that much easier..."

  6. #6
    Tweak it till it breaks! 100+ Posts zames77's Avatar
    Join Date
    Jan 2010
    Location
    Here
    Posts
    121
    Rep Power
    30

    Re: Ricoh SP3400N : All indicators are lit and printer won't work

    As neergish says, load Smart Organising Monitor (SOM), it'll probably be an error for the fuser which can be reset using the SOM.

  7. #7
    Senior Tech 100+ Posts
    Join Date
    May 2012
    Location
    port-louis
    Posts
    126
    Rep Power
    26

    Re: All indicators are lit and printer won't work

    Thank you very much, i will try to reset the printer using the Smart Organizing Monitor.


    Quote Originally Posted by sandmanmac View Post
    Really? I've never laid my eyes on one of these printers, yet I found this in about 6 seconds at Knowledge Base - Support Center | Ricoh-USA


    Panel Indicator

    Indicator patterns Cause
    All indicators are lit. There are problems with the printer. Check the printer status on the Smart Organizing Monitor dialog box.
    After checking the printer status, turn off the main power, and then turn it back on again.
    If all the indicators are still lit, contact your service representative.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here