Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 23
Paper Misfeed Error J073
Hello Guys,
Could you be so nice to give some of your experience with paper misfeed J073. We already clean the 2 duplex sensors in Paper registration. What else do we need to do.
Ricoh Aficio 1107ex user here. Thank you in advance!
-
service manager
- Rep Power
- 0
Re: Paper Misfeed Error J073
Three things usually cause this jam. Check the plastic plate on the left. The front pin is plastic and gets bent causing a misallignment. Second after 2-3 million on the bottom side of the same tray will crack causing jams. Third remove the metal cover and check the play of the solenoid. The pin where it fits into the paper guide will get at an angle not allowing free play. One of these solutions should fix it.
-
Technician
- Rep Power
- 23
Re: Paper Misfeed Error J073
Hello Thinman,
Your third advice works, "Third remove the metal cover and check the play of the solenoid. The pin where it fits into the paper guide will get at an angle not allowing free play. One of these solutions should fix it."
The pin was stock and not correctly positioned. We put some lock on this PIN so it will not get in a wrong position and not movable. Is it advisable to replace this part? Thank so much!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks