Thanks: 0
Likes: 0
Dislikes: 0
Dear All, My customer have broken one of the Duplexing part at the side cover. Now cant make 2 sided printing/copying.
we can't find the Duplex part at the part manual. Anyone can help on this and we need to order the part to repair the MP3350. thank
p_ad3000.pdf
Hope this is the correct manual.
the product code for the duplex unit is D369. i can email you a partc catalog if needed or describe part and i can try to grt you a part number. my email is petee7364@yahoo.com
Posted aboveOriginally Posted by petee7364
Thank Joshuadenmark,
This is the one, my customer broken this part (D369 4664 Lower Gate Pawl), Now we can order with the part number. thank a lot .
Tian
Hi Tian
Glad I could help.
Nice day to You.
Here's a tip, thoughtfully provided to me by spaceman99.
Where the driven guide plate clips into the duplex door, there is a metal pin the plate locks in to. Add a small piece of Apollon toner pump tube onto this pin and it will clamp the guide plate in place more securely. A common cause of this 4664 gate pawl being broken is the guide plate falling open when the duplex door is opened to clear a jam. The actuator on the gate pawl hits the front fuser pressure lever and breaks off. This mod stops this.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
you need just this two if your costumer just broke the gate pawl - D369 4664 Lower Gate Pawl ;if you cannot find the spring this is the part number for the spring - AA06 6314 Gate Pawl Lower Spring ;
and if the hole holder is broken you need this to - D369 4663 Guide Plate - Open/Close .
Reply With Quote
Bookmarks