Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2011
    Location
    SAN SALVO
    Posts
    195
    Rep Power
    0

    RICOH MP C3000 SC 290

    Greetings to all, does anyone know if there is a way to disable the shutter of the laser sensor?

  2. #2
    Service Manager 5,000+ Posts
    RICOH MP C3000 SC 290


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: RICOH MP C3000 SC 290

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  3. #3
    Service Manager 1,000+ Posts Polarbear's Avatar
    Join Date
    Feb 2012
    Location
    Cape Town
    Posts
    1,070
    Rep Power
    45
    If you have a problem with the laser unit shutter you can completely remove it by undoing the three screws that holds the shutter in place, as well as the two shutter arms and springs. The machine can work fine without it.
    Press the GREEN button!!

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2011
    Location
    SAN SALVO
    Posts
    195
    Rep Power
    0

    Re: RICOH MP C3000 SC 290

    yes, I know this, I was interested to know if there is a simulation SP able to prohibit the shutter operation

  5. #5
    Senior Tech 250+ Posts kannuki2's Avatar
    Join Date
    Feb 2012
    Posts
    398
    Rep Power
    0

    Re: RICOH MP C3000 SC 290

    check SP2-914 open and close should be at "38" . Unfortunately there is no SP to disable the shutter but you might have an issue with IOB also with this SC error.

  6. #6
    The New Guy 1,000+ Posts ruben's Avatar
    Join Date
    Oct 2012
    Location
    Bristol, UK
    Posts
    1,204
    Rep Power
    56

    Re: RICOH MP C3000 SC 290

    Quote Originally Posted by Polarbear View Post
    If you have a problem with the laser unit shutter you can completely remove it by undoing the three screws that holds the shutter in place, as well as the two shutter arms and springs. The machine can work fine without it.
    Best leave the arms and springs intact; removing the plate is sufficient.

    Quote Originally Posted by tecnomarco View Post
    yes, I know this, I was interested to know if there is a simulation SP able to prohibit the shutter operation
    No need, if you remove the plate then any settings are irrelevant.

  7. #7
    Senior Tech 250+ Posts
    Join Date
    Sep 2012
    Location
    Turin
    Posts
    257
    Rep Power
    30

    Re: RICOH MP C3000 SC 290

    With SP2-914-007 you can disable the presence of the motor and the SC290 should go away even there is a shutter motor there.

  8. #8
    Service Manager 1,000+ Posts Polarbear's Avatar
    Join Date
    Feb 2012
    Location
    Cape Town
    Posts
    1,070
    Rep Power
    45
    Interestting! Wonder what would happen if the shutter is stuck half open/close and you disable the motor.... Isn' that what the sc is for?
    Press the GREEN button!!

  9. #9
    Not a service manager 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,933
    Rep Power
    97

    Re: RICOH MP C3000 SC 290

    Quote Originally Posted by Polarbear View Post
    Interestting! Wonder what would happen if the shutter is stuck half open/close and you disable the motor.... Isn' that what the sc is for?
    Well, the general rule is: "No laser=no print", as if everything is working properly the areas of the drum not exposed by the laser will not attract toner. So if the shutter wasn't completely open and the SC is disabled, I'd guess that there would be parts of the print that was missing, but part of it would look fine.

  10. #10
    Senior Tech 250+ Posts
    Join Date
    Sep 2012
    Location
    Turin
    Posts
    257
    Rep Power
    30

    Re: RICOH MP C3000 SC 290

    If you take off the shutter and also disable the motor no problem at all. Sometimes I've seen machines with shutter removed and SC290. Disabling the motor solves it.

    If you disable the motor with shutter on you will get a blank page as the shutter is closed by default so no laser is goin to drums.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here