Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Technician
    Join Date
    Oct 2011
    Posts
    11
    Rep Power
    13

    Ricoh Aficio 1022 ADF paper jam

    When I use the ADF on my Ricoh Aficio 1022 is indicating a paper jam in the ADF every time but there is no jam.
    If I do one single sided copy in the ADF it does the copy ok but put puts jam indicator on
    If I do several, it does them OK but puts jam indicator on at end of copying.
    If I do one or more sheets duplex, it puts out a blank sheet and no copy and jam light is on.
    There is no paper jammed at any time.
    All printing both simplex & duplex works OK.
    Can anyone help please?


  2. #2
    Service Manager 1,000+ Posts rthonpm's Avatar
    Join Date
    Aug 2007
    Location
    Pennsyltucky
    Posts
    1,704
    Rep Power
    49

    Re: Ricoh Aficio 1022 ADF paper jam

    The biggest culprit for this is the sensor well for the registration sensor. Take off the left cover and the lower left stay unit below it and clean out the little well that the registration sensor uses on it to detect the change of state for paper: dust, debris and other goobies all love to make a home in it over time giving you all kinds of jams and other issues. Also be sure to clean the sensor itself as well.


  3. #3
    Service Manager 2,500+ Posts
    Ricoh Aficio 1022 ADF paper jam

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto
    Posts
    2,541
    Rep Power
    70

    Re: Ricoh Aficio 1022 ADF paper jam

    Quote Originally Posted by Snowman View Post
    When I use the ADF on my Ricoh Aficio 1022 is indicating a paper jam in the ADF every time but there is no jam.
    If I do one single sided copy in the ADF it does the copy ok but put puts jam indicator on
    If I do several, it does them OK but puts jam indicator on at end of copying.
    If I do one or more sheets duplex, it puts out a blank sheet and no copy and jam light is on.
    There is no paper jammed at any time.
    All printing both simplex & duplex works OK.
    Can anyone help please?
    Sorry, rthonpm , I think you are confusing this older DF with some of the newer models.

    This is simple too though.....There are 3 paper sensors on the original tray where you place your originals. They are the little 'black circles'. They simply become covered with dust over time, and so when the last original is fed, the machine thinks there is still a page on the feed tray, and shows 'misfeed'. Just clean them with a cloth, and you're good to go.


  4. #4
    Field Supervisor 500+ Posts Bantams's Avatar
    Join Date
    Jun 2012
    Location
    Bradford, West Yorkshire
    Posts
    590
    Rep Power
    22

    Re: Ricoh Aficio 1022 ADF paper jam

    Could also be the paper end sensor actuator on the ADF top cover as been broken off or dislodged


  5. #5
    Technician
    Join Date
    Oct 2011
    Posts
    11
    Rep Power
    13

    Re: Ricoh Aficio 1022 ADF paper jam

    Thanks for all your suggestions. I will check all of them and report back next week.


  6. #6
    Senior Tech 250+ Posts kannuki2's Avatar
    Join Date
    Feb 2012
    Posts
    382
    Rep Power
    0

    Re: Ricoh Aficio 1022 ADF paper jam

    Usually I cleaned all sensors and replace new clutch when the ADF jam like it.


  7. #7
    Technician
    Join Date
    Oct 2011
    Posts
    11
    Rep Power
    13

    Re: Ricoh Aficio 1022 ADF paper jam

    I cleaned the 3 sensors on the original tray as suggested and it now all works perfectly.
    Thank you all for your interest & help


  8. #8
    Field Service Manager SteveF's Avatar
    Join Date
    Jul 2012
    Location
    Birmingham
    Posts
    47
    Rep Power
    11

    Re: Ricoh Aficio 1022 ADF paper jam

    Quote Originally Posted by Snowman View Post
    When I use the ADF on my Ricoh Aficio 1022 is indicating a paper jam in the ADF every time but there is no jam.
    If I do one single sided copy in the ADF it does the copy ok but put puts jam indicator on
    If I do several, it does them OK but puts jam indicator on at end of copying.
    If I do one or more sheets duplex, it puts out a blank sheet and no copy and jam light is on.
    There is no paper jammed at any time.
    All printing both simplex & duplex works OK.
    Can anyone help please?
    Hi
    on that df theiris a cushion stuck on the edge of the duplex gate ( to stop it making a noise ) it becomes sticky and stopps the gate opening on time or opening at all


  9. #9
    Service Manager 2,500+ Posts
    Ricoh Aficio 1022 ADF paper jam

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto
    Posts
    2,541
    Rep Power
    70

    Re: Ricoh Aficio 1022 ADF paper jam

    Quote Originally Posted by SteveF View Post
    Hi
    on that df theiris a cushion stuck on the edge of the duplex gate ( to stop it making a noise ) it becomes sticky and stopps the gate opening on time or opening at all

    Good call Steve! I somehow missed the duplexing issue he described, and only dealt with the single-sided misfeeding issue.
    Those rubber cushions on the duplex gate always caused issues!


  10. #10
    It's GREEN Again! :-) 100+ Posts
    Join Date
    May 2011
    Location
    A Small City in MI
    Posts
    217
    Rep Power
    16

    Re: Ricoh Aficio 1022 ADF paper jam

    Quote Originally Posted by sandmanmac View Post
    Good call Steve! I somehow missed the duplexing issue he described, and only dealt with the single-sided misfeeding issue.
    Those rubber cushions on the duplex gate always caused issues!
    Yup, I just put a VERY small dab or grease on that cushion, and it never sticks again.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here