Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: aficio551

  1. #1
    Senior Tech 250+ Posts vargue's Avatar
    Join Date
    Oct 2011
    Location
    alexandria
    Posts
    333
    Rep Power
    16

    aficio551

    i have 2 machines have same thread when i do scanner adjustment it's failed .any suggestions. it's working but some times sc124 revealed and solved but when i go to sp mode to make scanner adjustment it's failed


  2. #2
    Service Manager 10,000+ Posts
    aficio551

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    141

    Lightbulb Re: aficio551

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com


  3. #3
    Field Supervisor 1,000+ Posts Eric1968's Avatar
    Join Date
    Jan 2009
    Location
    Rotterdam, Netherlands
    Posts
    2,465
    Rep Power
    59

    Re: aficio551

    From the Service Manual :


    -Possible cause-

    Scanner motor connector defective

    Scanner motor defective

    MCU defective

    Scanner wire, timing belt, pulley out of position

    PSU defective

    BTW, this machine belongs to the museum....



  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Aug 2009
    Posts
    84
    Rep Power
    17

    Re: aficio551

    We've had trouble with the scanner pulleys on these. the set screws loosen up and even break.


  5. #5
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    7,073
    Rep Power
    152

    Re: aficio551

    Quote Originally Posted by Eric1968 View Post

    BTW, this machine belongs to the museum....
    Not only does it belong in a museum, if you need parts to repair it you might be out of luck. Termination of parts availability was February 2010.

    Replace the machine. The customer will get much more functionality.


  6. #6
    Senior Tech 250+ Posts Polo-022's Avatar
    Join Date
    Sep 2007
    Posts
    311
    Rep Power
    24

    Re: aficio551

    Let me guess : PSU
    This is your last choice after all.



  7. #7
    Technician rhernandez's Avatar
    Join Date
    Feb 2013
    Location
    Irvine,California
    Posts
    8
    Rep Power
    0

    alignment tool

    I think this one requires the scanner alignment pins. They go in from the top frame to alignment the carriages in the right position. Usually the pulley screws break off the front cable pulley or the back. Then it gets all skewed and maybe the cables pop off. The pins make it slot easier.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here