Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Oct 2008
    Location
    manchester
    Posts
    506
    Rep Power
    24

    Ricoh 1013 jam A

    Intermittently jams at a. Mainly stops at the fuser entrance (before going in to the fuser)

    I replaced the fusing exit sensor. Also jams at bypass too same place.


  2. #2
    Field Supervisor 1,000+ Posts Eric1968's Avatar
    Join Date
    Jan 2009
    Location
    Rotterdam, Netherlands
    Posts
    2,465
    Rep Power
    58

    Re: Ricoh 1013 jam A

    Try to adjust the cover switch. Happens often with these machines.


  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Oct 2008
    Location
    manchester
    Posts
    506
    Rep Power
    24

    Re: Ricoh 1013 jam A

    Quote Originally Posted by Eric1968 View Post
    Try to adjust the cover switch. Happens often with these machines.
    Wheres the cover switch?


  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Oct 2008
    Location
    manchester
    Posts
    506
    Rep Power
    24

    Re: Ricoh 1013 jam A

    Quote Originally Posted by Eric1968 View Post
    Try to adjust the cover switch. Happens often with these machines.
    If it's the door switch then why is it showing jam a and not "close door"?


  5. #5
    Technician
    Join Date
    May 2010
    Location
    Cedar-Lake,Indiana
    Posts
    36
    Rep Power
    17

    Re: Ricoh 1013 jam A

    check the transfer roller on the side door, have seen the gear go bad or the roller out of place


  6. #6
    Field Supervisor 500+ Posts
    Join Date
    Oct 2008
    Location
    manchester
    Posts
    506
    Rep Power
    24

    Re: Ricoh 1013 jam A

    Quote Originally Posted by 41-willys View Post
    check the transfer roller on the side door, have seen the gear go bad or the roller out of place
    Transfer roller and gear is ok


  7. #7
    Trusted Tech 50+ Posts cdog530's Avatar
    Join Date
    Nov 2009
    Location
    RDG
    Posts
    67
    Rep Power
    17

    Re: Ricoh 1013 jam A

    Dirty paper feed clutch / registration clutch?
    -C


  8. #8
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    6,877
    Rep Power
    148

    Re: Ricoh 1013 jam A

    Quote Originally Posted by ash_572 View Post
    If it's the door switch then why is it showing jam a and not "close door"?
    Door switch opens momentarily during a copy. You might get a beep but the fakse door open condition does last long enough for the light to come on. When the door is detected as open all motors stop. When the door is seen as closed again, paper is at a sensor and is detected as a jam. There will be no jam logged in the jam history. Depending on the MFP model, you might get jams at power counts in the jam location counters.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here