Codes out, will not reset. I know that this is an exhaust fan error code, but am unsure where it is located. Does anyone have a rough location or parts number for the exhaust fan or fans related to this code?
Codes out, will not reset. I know that this is an exhaust fan error code, but am unsure where it is located. Does anyone have a rough location or parts number for the exhaust fan or fans related to this code?
Book says main cooling fan. Also check the waste toner system for clog coming from the transfer belt unit.
Yeah defffo waste toner system clogged had loads of times
Trackback
Hello everyone! ! My friend! Ricoh C3000 color copier results as shown, print effect is not a good question, is there such a failure this copier, optical also cleaned up, and fought copying prospective effect does not work! ! There are no friends friends to know that this is why, thank you!09822.jpg123457.jpg
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
broke the main fan is back. regards
i thought 495 was the waste toner bind/clog etc problem..
on these older ricohs the main fan doesnt come up to speed.
i think as you face the back its the one to the left.
i have blown them out and pulled the label on the outside cover exposing the main bearing..
hit it wth wd40,spin the fan and reconnect n see if it spins on power up.
when you get it running i put some light grease and cover hole/bearing wth tape..
good luck
I have come across this in the past. Eventually cleared the problem by completely purging the toner supply system. See service manual section for procedure to follow when having to put the machine into storage or transporting it. (The machine had been sitting un-used for awhile).
Bookmarks