Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Field Supervisor 500+ Posts Codex's Avatar
    Join Date
    May 2008
    Location
    Sicily
    Posts
    647
    Rep Power
    42

    Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??

    Hello

    We have a lot of 2075,2090,2105, Mp9000 by our customers, sometimes one or more of these machines have a strange image quality problem.......it's almost the same for all machines (2075 , MP9000....)
    see the attached file please!!.

    the machine replies the image of the copy before, but it seems to be negative (black and white are inverted)......the problem occurs in normal and in duplex mode.....
    Attached Files Attached Files

  2. #2
    Service Manager 1,000+ Posts Polarbear's Avatar
    Join Date
    Feb 2012
    Location
    Cape Town
    Posts
    1,070
    Rep Power
    45

    Re: Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??

    It would seem that the machine's quenching does not remove the residual image from the drum before the new image is written to the drum. This would be the only logical reason why the previous image can still be on the drum.
    Press the GREEN button!!

  3. #3
    Field Supervisor 500+ Posts Codex's Avatar
    Join Date
    May 2008
    Location
    Sicily
    Posts
    647
    Rep Power
    42

    Re: Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??

    i thought the same.....but why the image is negative???, i have the problem in a series of machines .....from the Aficio 1060 to the Pro106 EX

  4. #4
    Service Manager 5,000+ Posts
    Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:



    www.justmanuals.com


    paul@justmanuals.com

  5. #5
    Senior Tech 100+ Posts Herostrat's Avatar
    Join Date
    Oct 2012
    Location
    Belgrade
    Posts
    220
    Rep Power
    26

    Re: Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??

    Cleaning blade isn't doing it's job...that's cleaning blade leaking or cleaning blade low pressure on drum.
    The print transfers to paper to some point and exces toner is supposed to go in recycling system but cleaning brush is dirty and full of toner so you get those gray irregular bubbles or areas on paper and cleaning blade lets that slip under and repeat on paper.
    It gives impresion of negative print because toner already transfered on paper and leaves blank area where letters were,the gray around white letters is toner dirt that brush didn't clean.
    Tighten the cleaning blade lever spring and vacume the brush.
    Gears,springs,clutches,sliders,connectors and electronics...who on earth can tell what's wrong with it?

  6. #6
    Service Manager 2,500+ Posts rthonpm's Avatar
    Join Date
    Aug 2007
    Location
    Pennsyltucky
    Posts
    2,790
    Rep Power
    108

    Re: Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??

    Make sure your techs aren't flipping the blade by turning the drum the wrong way during cleaning blade replacements as well. Also make sure they're using good setting powder and not used toner during PMs.

  7. #7
    former propeller tester 250+ Posts
    Join Date
    Dec 2009
    Posts
    478
    Rep Power
    33

    Re: Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??

    does your business hand out crap toner

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Nov 2010
    Location
    Europe
    Posts
    73
    Rep Power
    28

    Re: Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??

    Have seen this before, transfer problem. Make shure the transfer section is really clean and replace the transfer-bias roller.good luck!

  9. #9
    Field Supervisor 500+ Posts Codex's Avatar
    Join Date
    May 2008
    Location
    Sicily
    Posts
    647
    Rep Power
    42

    Re: Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??

    Quote Originally Posted by BLADE View Post
    does your business hand out crap toner
    no, we use only original Ricoh Toner

  10. #10
    Field Supervisor 500+ Posts Codex's Avatar
    Join Date
    May 2008
    Location
    Sicily
    Posts
    647
    Rep Power
    42

    Re: Have you ever seen this problem on Aficio 2075, 2090, MP9000 series??

    Quote Originally Posted by Vollegaaz View Post
    Have seen this before, transfer problem. Make shure the transfer section is really clean and replace the transfer-bias roller.good luck!
    replace?, what about cleaning?, doesn't work??

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here