Yes, i did initialize the developer also id sensor,the developer bag its mixed with a little toner inside so the copier was working until td sensor was trying to add toner inside.
"sent td sensor all over the place" ?
Yes, i did initialize the developer also id sensor,the developer bag its mixed with a little toner inside so the copier was working until td sensor was trying to add toner inside.
"sent td sensor all over the place" ?
Glad you found that, when you have pinched wires, or wires rubbing against a frame,etc. that cause intermittent problems, they are tough to find sometimes.
The Motor had 16/18v instead 24v so it was confused becouse sometimes it adds toner inside and trick me to suspect all other things.I belive the detached wires was the + and made short circuit.Thx for replays and good luck on next problem.
And sorry for my english, im more used to technical words then write.
Bookmarks