Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts spanky's Avatar
    Join Date
    Sep 2012
    Location
    Md
    Posts
    230
    Rep Power
    14

    Savin 9040SP reduces image when using document feeder

    Only when using the document feeder the image is reduced from lead to trail edge.

    This will leave a line near the trail edge of the copy, which is the trail edge of the original.

    Is this an adjustment for the transport motor in the document feeder?

    Thank you in advance


  2. #2
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    6,870
    Rep Power
    148

    Re: Savin 9040SP reduces image when using document feeder

    Quote Originally Posted by spanky View Post
    Only when using the document feeder the image is reduced from lead to trail edge.

    This will leave a line near the trail edge of the copy, which is the trail edge of the original.

    Is this an adjustment for the transport motor in the document feeder?

    Thank you in advance
    Are you sure that you are having a reduction problem and not a registration problem? If the line is less than 1 mm from the edge of the copy paper, you can try adjusting the trailing edge erase SP 6006-007.


  3. #3
    Service Manager 1,000+ Posts rthonpm's Avatar
    Join Date
    Aug 2007
    Location
    Pennsyltucky
    Posts
    1,704
    Rep Power
    49

    Re: Savin 9040SP reduces image when using document feeder

    Check to see if the margin adjustments in User Tools are set to create a margin for binding.


  4. #4
    Senior Tech 100+ Posts spanky's Avatar
    Join Date
    Sep 2012
    Location
    Md
    Posts
    230
    Rep Power
    14

    Re: Savin 9040SP reduces image when using document feeder

    Quote Originally Posted by rthonpm View Post
    Check to see if the margin adjustments in User Tools are set to create a margin for binding.
    The copier works properly when copying from the glass, wouldn't that adjustment also cause the same issue from the glass?


  5. #5
    Senior Tech 100+ Posts spanky's Avatar
    Join Date
    Sep 2012
    Location
    Md
    Posts
    230
    Rep Power
    14

    Re: Savin 9040SP reduces image when using document feeder

    Quote Originally Posted by rthonpm View Post
    Check to see if the margin adjustments in User Tools are set to create a margin for binding.
    I can hold up the original against the copy and see that it has been reduced.


  6. #6
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    6,870
    Rep Power
    148

    Re: Savin 9040SP reduces image when using document feeder

    Quote Originally Posted by spanky View Post
    I can hold up the original against the copy and see that it has been reduced.
    If it is reduced slightly using the feeder but not on the glass, you can try using SP 6017 (Sheet Through Magnification) to adjust.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here