RICOH MPC 2500 with unknown the cause

[khaled_abosere3@yahoo.com]

First machine display "please wait"
then we replace the HDD disk with new and formatted it and machine warming up and print well
second we make print of test pattern it was well but when we make a copy of it the copy was shown as in following attachment we replaced the CDD but without any Interest.

[slimslob]

Did you scan the attachments on the machine you are having trouble with or on a machine at your office. If it was not on the machine you are having trouble with, I would say the IPU board.

[ruben]

Do a memory clear on printer (just in case) and copier applications, then re-seat the memory DIMMs.

[khaled_abosere3@yahoo.com]

Did you scan the attachments on the machine you are having trouble with or on a machine at your office. If it was not on the machine you are having trouble with, I would say the IPU board.

NO, I scan with machine at my office not the machine which has the trouble.

[Tonerbomb]

Did you scan the attachments on the machine you are having trouble with or on a machine at your office. If it was not on the machine you are having trouble with, I would say the IPU board.

That's pretty F'ed up!!! I'm with slimslob on the IPU.................

[slimslob]

NO, I scan with machine at my office not the machine which has the trouble.

Two places the image can get corrupted. The HDD, you already replaced. The IPU board.

[Tonerbomb]

we replaced the CDD but without any Interest.

Does this mean you replaced the CCD??? And if you did, was the SP data for the new CCD entered into the machine??? Each CCD is factory calibrated and has it's own data to enter into the machine.....

[slimslob]

I did some checking. This machine does not have an IPU. Image processing is done on BICU board.

[JustManuals]

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com


Paul@justmanuals.com

[khaled_abosere3@yahoo.com]

Do a memory clear on printer (just in case) and copier applications, then re-seat the memory DIMMs.

Thank you very much Mr.ruben
the problem has solved as your suggestion