Dislikes: 0
greetings everyone,
we have ricoh aficio 3045 and ricoh mp4500 that displays "RESTART" then small boxes appear below the "restart" message. it just appear while copying and we have to turn the machine off to copy again. i would like to ask for your help on what causes this message to appear and what's the solution.
hope you can help.
Check the SMC-list for the SC's. This is the only way to find the problem.
Change the setting of SP 5875 SC Auto Reboot to 2. This will make the machine display the SC code instead of the reboot screen.
You need to call a qualified tech to resolve this.......
Mystic Crystal Revelations
Re: aficio 3045 / mp4500
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
thank you eric1968. i finally saw the error sc395 which based on the manual:Originally Posted by Eric1968
Development output abnormal
A development bias leak signal is
detected. High voltage output to the
development unit exceeded the upper
limit (65%) for 60 ms.
• High voltage supply board defective
• Poor connection at the development
bias terminal
• Poor connection at the high voltage
supply board
thank you also slimslob. i tried changing it to 2 but i was able to change it to 1 only because the options were between 0 and 1 only.
I got ricoh mp4500.1st, image appear more to gray color.i allready force toner many times, change developer unit..still same.now i try change developer connector from ricoh 2045..now no image appear..plz some one help me
In the future, start a new thread. Don't go resurrecting one that has been dead for almost a year.
Posting Permissions
Thanks: 
Likes: 
Reply With Quote
Bookmarks