MP2510 style fusers

[Iowatech]

I just saw the right hand pressure roller bearing compress the spring and pop out of it's mounting area for the second time. Of course that caused poor fusing and jams. Also, the e-clip that holds the bearing on had come off.
Heh, I was so focused on looking for the hot roller bearing problem, I almost missed it. Hopefully this will save somebody the time I wasted.

[Zeldaman]

Hi there!
Iowatech, one tip: allways take a good look at the baseplate. To the left & right, there are plastic-"holders" for the hotroller-bearings. They like to break, and can kill the whole fuser, with really bad luck the psu. I allways had this part in the car.
Greetings...