Ricoh SP5200 DN - Non feed J004

[Lagonda]

Try our trick, we fitted the feed roller from a MP 2500, A267 2751, and got a big reduction in non-feed jams.

[Oze]

Try our trick, we fitted the feed roller from a MP 2500, A267 2751, and got a big reduction in non-feed jams.

I just grabbed one from stock to put into my car stock...I'll try this the next time I have a non feed jam call

[Zaxxon]

Try our trick, we fitted the feed roller from a MP 2500, A267 2751, and got a big reduction in non-feed jams.

These rollers are not interchangeable, do you only use the rubber?

[Lagonda]

Whoops! Sorry should have been a bit more explicit, Yes we swap the rubbers over.

[Oze]

Whoops! Sorry should have been a bit more explicit, Yes we swap the rubbers over.

Would've been handy to know that bit before going on a call...!!!
Ended up smashing it in place with mallet..... .j/k

[Lagonda]

Would've been handy to know that bit before going on a call...!!!
Ended up smashing it in place with mallet..... .j/k

You sure your not one of our field techs? I can name at least 3 delinquents here that would take that approach.
My first job when I got promoted to supervisor was to check the guys tool kits and confiscate any hammers.

[Zaxxon]

Whoops! Sorry should have been a bit more explicit, Yes we swap the rubbers over.

Thanks :-)

[Zaxxon]

Try our trick, we fitted the feed roller from a MP 2500, A267 2751, and got a big reduction in non-feed jams.

This worked, just checked today only one nonfeed jam logged :-) I am happy - Thanks to you all :-)