Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: A

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jun 2011
    Location
    Plano, TX
    Posts
    52
    Rep Power
    26

    A

    Despite owning the Just Manuals for this machine, we don't show this code. Lovely. Any help out there, please?

  2. #2
    Master Of The Obvious 10,000+ Posts
    A

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: A

    You'll need to be just a teeny bit more specific. Maybe you could tell us what manufacturer, what model, what code, ... that sort of thing.
    If you want help that is.

    I'm not feeling particularly psychic today. =^..^=
    Last edited by blackcat4866; 03-20-2014 at 04:17 PM.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jun 2011
    Location
    Plano, TX
    Posts
    52
    Rep Power
    26

    Re: A

    Quote Originally Posted by blackcat4866 View Post
    You'll need to be just a teen bit more specific. Maybe you could tell us what manufacturer, what model, what code, ... that sort of thing.
    If you want help that is.

    I'm not feeling particularly psychic today. =^..^=

    Sorry, the title was supposed to read "Ricoh Aficio 2060 SC 552" This is indicative of what kind of week I have had--again, sorry. Just shows I need to proofread posts! Any help would be much appreciated. Do not understand why it is not in the "manual" i downloaded from Just Manuals.

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    Buffalo, NY
    Posts
    227
    Rep Power
    32

    Re: A

    It's on page 4-54(492) of the Manual...


    Fusing thermistor error 2

    Fusing lamp disconnected
    Thermistor bent, damaged
    Thermistor position incorrect

  5. #5
    Field Tech 50+ Posts HDSB's Avatar
    Join Date
    Feb 2013
    Posts
    64
    Rep Power
    23

    Re: A

    Its in the manual i have, maybe you should ask for a refund?

    552 A Fusing thermistor error 2
    The end thermistor (contact type)
    could not detect:
    • 100°C 25 seconds after the start
    of the warmup cycle.
    • A change in temperature more
    than than 16 degrees for 5
    seconds.
    • The reload temperature with 56
    seconds after the start of the
    fusing temperature control cycle.
    • Fusing lamp disconnected
    • Thermistor bent, damaged
    • Thermistor position incorrect

  6. #6
    Master Of The Obvious 10,000+ Posts
    A

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: A

    I don't have the manual for that particular model, but I looked in three other model manuals, and they all said the same thing: SC552 Pressure roller thermistor error.

    I haven't seen your copy of the manual, but before you get too excited, be sure that you've checked the section of Troubleshooting > Error Conditions > Description. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Service Manager 2,500+ Posts
    A

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: A

    Quote Originally Posted by powshar View Post
    Do not understand why it is not in the "manual" i downloaded from Just Manuals.
    The manual I have includes 1060 (B064)/2060 (B140)....among others
    The code doesn't exist in the 1060.
    I would suggest you're not looking at the correct (B140) SC table.

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Jun 2011
    Location
    Plano, TX
    Posts
    52
    Rep Power
    26

    Re: A

    [QUOTE=sandmanmac;409236]The manual I have includes 1060 (B064)/2060 (B140)....among others
    The code doesn't exist in the 1060.
    I would suggest you're not looking at the correct (B140) SC table.[/


    It turns out that you are right on, if I had looked further down, I would have found it on my own, but would have missed all this great convo with all you handsome helpful boys! Thanks!

    Sharon

  9. #9
    Master Of The Obvious 10,000+ Posts
    A

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: A

    Clearly you haven't been to my profile page. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  10. #10
    Field Tech 50+ Posts HDSB's Avatar
    Join Date
    Feb 2013
    Posts
    64
    Rep Power
    23

    Re: A

    open manual > control + F > enter code > problem solved.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here