Spc 430 dn printer very light black print out. Colour 300 and black 100 prints only.
Replaced with another new PCU still the same. Black toner pump ok.
Machine also not performing colour registration.
Thanks
Spc 430 dn printer very light black print out. Colour 300 and black 100 prints only.
Replaced with another new PCU still the same. Black toner pump ok.
Machine also not performing colour registration.
Thanks
Last edited by saa; 04-14-2014 at 02:59 PM.
"Black toner pump ok." What do you mean by this? Did you do a toner motor test for K? It sounds to me like it is not supplying toner, most probably because the toner coiled has turned up on itself and therefore not supplying toner anymore.
We had huge problems with the toner supply coils - so much so we got a local engineering company to make metal replacements, and these seemed to, in most cases, solve the problem.
See the link here: http://www.copytechnet.com/forums/at...ure-spc430-pdf
Press the GREEN button!!
+1 Polarbear....replace the pump.
A lot of us have had nothing but issues with this machine and failing augers.
Can anyone tell me if the SPC431 was any better reliability wise, or was it just a controller upgrade?
Sent from my GT-P7500 using Tapatalk
Press the GREEN button!!
Thanks for guide it is pump / coil issue solved.
Bookmarks