Anyone got the reset for this ? Can't find it anywhere in the manual, it just says enter engine mode. This is the op panel I've got on it.
Help ! Just to clarify, it's an SPC231sf, my edit of the header hasn't worked.
Last edited by spaniel ears; 05-21-2014 at 01:55 PM.
That is a fusing unit error. Check the fusing unit for open lamp, open thermostat or bad thermistor. Repair the fusing unit then execute "Engine Maintenance Menu" to recover the machine. If the error does not clear or comes back, the causing problem is not repaired. If you don't have a service manual, get one.
Bookmarks