Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    TECHBOY
    Guest

    RICOH AFFICIO 400

    RICOH AFFICIO 400 PAPER FEED FROM BYPASS AND LTC ARE WORKING IN REVERSE MEANING FOR SOME REASON THE PAPER FEED ROLLERS ARE ROTATING IN THE OPPOSITE DIRECTION CAUSING THE PAPER FROM THE BYPASS TO BE FORCED OUT OF THE TRAY AND JAMMING IN THE LTC HELP ANY THOUGHTS????????????/


  2. #2
    Junior Member Rocket Psyantist's Avatar
    Join Date
    May 2006
    Posts
    4
    Rep Power
    0

    Re:RICOH AFFICIO 400

    Sounds like you need a good paper feed station overhaul. Replace the feed shaft and one way bushing mainly. Sometimes you can sqirt some light oil like wd-40 or Kroil on the shaft where it goes into the one way bushing and this may buy you some time till you get the parts in. Carefull not too much oil.


  3. #3
    AutoMajical Resolutionist 2,500+ Posts
    RICOH AFFICIO 400

    Tonerbomb's Avatar
    Join Date
    Feb 2005
    Location
    Bugaha
    Posts
    2,584
    Rep Power
    78

    Re:RICOH AFFICIO 400

    Skip the oil wash the drive bearings out with alcohol(not beer) and then blow\'em out with air. Polish the shaft off with some 600 grit sand paper wipe clean. You may have a drive bearing in the wrong place also, Some are lefty and some are righty. Check the direction arrow on the bearing.:evil: :evil: :evil:

    Mystic Crystal Revelations

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here