All recent Ricoh models, released in the last 9 months, have had an update and the SP modes are now accessed differently and no longer by pressing Yellow 1 0 7 Red (cancel) Key:
Press the Yellow (Reset) Key , then 806182then press the 'C' key
All recent Ricoh models, released in the last 9 months, have had an update and the SP modes are now accessed differently and no longer by pressing Yellow 1 0 7 Red (cancel) Key:
Press the Yellow (Reset) Key , then 806182then press the 'C' key
We have RICOH MP 3353SP
I think that it is only the xxx3 models that have the new code. There are a couple of other threads on this subject in the Ricoh, Savin, Gestetner, Lanier copier forum.
Very old news...
In case anyone hasn't come across it yet, if you go to a printer version of one of the 03 range, then to access SP mode you have to press and hold the HOME and SIMPLIFIED SCREEN buttons for over 3 seconds and then press the USER TOOLS button
To access SSP on these models press and hold HOME and SIMPLIFIED SCREEN for over 3 seconds, then press SIMPLIFIED SCREEN again
And to enter the mode to enable you to calibrate the screen, press SIMPLIFIED SCREEN 4 times, press SUSPEND SCREEN, then press SIMPLIFIED SCREEN 4 more times.
I hope this is of use to people, took me quite some time to find this info when I needed it
There are 10 types of people in this world, those who understand binary maths and those who don't
thank you
On the MP C306 you have to first hit the "Stop" and "Job List" before "Reset">806182>C
What? And missing the fun of people coming here moaning that they messed up their machines and now they have to pay to have them fixed?
Naah, too much fun!
Here for those who can't read!
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Bookmarks