Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Log in to your Ricoh support page & look for any parts manual updates, it will be there
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
According to Tech Service Bulletin 012 for the MP2000, B1219640 is for use in Asia only. B1219645 is for use in North America and Europe. As for the MP 2001L, it was not made available in the United States so I cannot get any manuals or bulletins to check.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
First, get the proper developer. Before you put it in, check for toner filming on the development roller. Clean it while there is no developer in the unit. If you think you might have a toner density sensor problem, replace it while there is no developer in the unit. Clean all toner residue from the PCU.
If this was my call i'd order a new dev unit, bag of developer, update all the firmware then fit the parts & not forgetting to run the dev setup procdure (SP2-801-001) I think as only did one myself last week, if you didn't perform this then that might be your problem.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks