Hi Guys !
Is there any way to reset the MPC3300 NVRam to "0" Counter ?
Any solutions ?
Thank you !
Hi Guys !
Is there any way to reset the MPC3300 NVRam to "0" Counter ?
Any solutions ?
Thank you !
Buy a new NVRAM.
But it's illegal. Would you buy a 10 year old car with 000000 on the odometer?
There's lots of posts from others with the same request, that are generally not very well received by the consortium (to borrow Tonerbomb's term )
There is NO valid reason to do this, other than to commit fraud by misrepresenting the usage of a machine, and misleading a customer.
I can't wait to hear your reason......
Either buy a new machine or a new NVRAM. There is no secret setting or modification that can be done and there is no secret factory mode that can be used.
It doesn't matter that the machine is old, or that the customer is aware of it: deliberately altering the metre like that is no different than modifying an odometre in a car to show 0 miles, which is illegal almost everywhere. At least in the US, altering the counter on a copier is also considered an unethical practise, and should be just about anywhere else as well.
Why can't these posts just be deleted or locked?
Like we've mentioned before, you can compare the total counter with the odometer of a car. The MP C3300 is not a new machine. You should inform the customer of the total counter of the machine. You just can't sell this kind of machine with 000000 on the total counter. And if the customer has done some research, you're in big trouble (at least in my country).
It is crap like this, over and over, that keeps me from being an active contributor to this once fine venue.
Bookmarks