mpc6000

[copierlady]

Hey guys,
Working on ampc 6000 and getting a sc530 code. Replaced BOTH fuser cooling fans. Don't know where to go from here. Anyone have a suggestion?
Thnaks

[Gamut]

Gooses states SC530 :replace PSU and VBCU as a set?

Do they not fire up at all?

[copierlady]

Thanks for the info. Yes it fires up. It goes though the warm up and then throws the code. Can I take boards from another machine, or do I have to use the original boards? Konica Minolta will not let you swap boards on some of their machines.

[slimslob]

Thanks for the info. Yes it fires up. It goes though the warm up and then throws the code. Can I take boards from another machine, or do I have to use the original boards? Konica Minolta will not let you swap boards on some of their machines.

I think that Gamut was referring to the fans.

Yes, you can swap the boards. For boards with NVRAM installed, you have to keep the NVRAM for each machine with that machine.