Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Junior Member NatGarrison's Avatar
    Join Date
    Sep 2017
    Location
    Raleigh, NC
    Posts
    2
    Rep Power
    0

    Re: Aficio SP 3510 - Host Name Issue

    My Ricoh SP 3500N does the same thing; its hostname keeps changing to my computer's hostname. I believe that I am also using the Universal Print Driver. I will try switching to the Windows driver and see how that works.


  2. #12
    Senior Tech 100+ Posts
    Aficio SP 3510 - Host Name Issue


    Join Date
    Jul 2011
    Location
    sevilla
    Posts
    115
    Rep Power
    0

    Re: Aficio SP 3510 - Host Name Issue

    I already believed you, it happened to me.


    I could not scan


    the machine came from eeu as it seemed that someone was playing


    was the universal controller


  3. #13
    Junior Member NatGarrison's Avatar
    Join Date
    Sep 2017
    Location
    Raleigh, NC
    Posts
    2
    Rep Power
    0

    Re: Aficio SP 3510 - Host Name Issue

    I sent an e-mail to Ricoh tech support and they responded that I should update the firmware and driver. I'm going to try that.


  4. #14
    It's not easy being green 1,000+ Posts Cipher's Avatar
    Join Date
    May 2006
    Posts
    1,146
    Rep Power
    39

    Re: Aficio SP 3510 - Host Name Issue

    SP3510N / M1165052D

    ------------------------------------------------------------------------
    [Modification history]
    ----------------------------------------

    Version 2.10
    Other changes:
    - The LED pattern showing the network state was standardized for all models.

    ----------------------------------------
    Version 2.09
    Specification changes:
    - Support of Mac OS 10.12(Sierra)




    ----------------------------------------
    Version 2.08
    Symptom corrected:
    When "DHCP" is set to "Active" and "DNS Method" is set to
    "Auto-Obtain (DHCP)", an extra character is added in the domain name.



    Other changes:
    In Mac OS X 10.11, if the "Queue" field is blank when adding a
    printer by specifying its IP address, the operating system
    experiences a significant delay in response time.




    ----------------------------------------
    Version 2.07
    Minor bug fixed.




    ----------------------------------------
    Version 2.06
    Symptom corrected:
    1. The XSS vulnerability on Web Image Monitor. (GFPR#RA13080002)
    2. If the job size is 200 kilobytes or is an integer multiple of
    that size, the device stalls when the LPR protocol is used and
    the "LPR Byte Counting Enabled" option is checked for using
    TCP/IP ports.
    Ohter changes:
    1. Korean language has been added to the Web Image Monitor.




    ----------------------------------------
    Version 2.05
    Symptom corrected:
    The gateway address might be cleared when its lease from the DHCP
    server expires, which would cause the related connections to other
    segments to fail.




    ----------------------------------------
    Version 2.04
    Other changes:
    Supports continuous printing on Linux via USB.


    Symptom corrected:
    1. When printing certain data, thin lines might not appear or
    multiple dashes might be printed.
    2. The transfer roller counter (maintenance mode) cannot be reset to
    a value of 0.
    3. A spelling error in maintenance mode was corrected: "Think" -> "Thick".




    ----------------------------------------
    Version 2.02
    Symptom corrected:
    1. If accessing the printer from a specific IP address
    (192.0.0.0/24), the job cannot be printed.
    2. If the DHCP setting is disabled, the IP address is shown as
    0.0.0.0 on the Smart Organizing Monitor Lt.




    ----------------------------------------
    Version 2.01
    Symptom corrected:
    1. The PCL5 algorithm for variable-width fonts is applied to
    fixed-width fonts. This caused line widths to be inconsistent and
    might have affected the placement of other objects on the page.
    (GFPR#RE12060006)
    2. 600-DPI PCL jobs that print to A5, B6-S, or legal-size paper
    might miss some characters while printing.




    ----------------------------------------
    Version 2.00
    Other changes:
    1. Full support for PCL6 Universal Driver v3.11.0.0 or later.
    2. The device can now be used with Smart Organizing Monitor Lt.


    Symptom corrected:
    PCL jobs with job names (@PJL JOBNAME) that contain the '%'
    character, will stall the MFP. (GFPR#RA12010001)




    ----------------------------------------
    Version 1.00
    1st Mass production


    - I know what I need to know as I need to know it, but knowing is not enough I must understand what I know.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here