Hi,
I have an aficio 2035S/P and the top feeder is having problem taking the page.
The page goes in a little and stops and jam.
I am wondering if there are steps to figure out what roller or sensor is bad ?
Thanks
Hi,
I have an aficio 2035S/P and the top feeder is having problem taking the page.
The page goes in a little and stops and jam.
I am wondering if there are steps to figure out what roller or sensor is bad ?
Thanks
Could be any number of things based on the limited description, but if it happens every single time, then my money's on the scanning roller gear being cracked and turning freely on its shaft
Item #10 in the diagram
(The gear that cracks is at the front part of the indicated assembly)
Scanning Roller.pdf
Adf feed belt and PU roller, reverse roller, and torque limiter. What have you done so far to troubleshoot the issue?
NEVER ASSUME ANYTHING
Open the doc feeder cover, while turning the blue wheel at the front, if it doesn't turn the large scanner rollers OR they are easy to keep from turning by applying a little pressure, then the gear is cracked (as i said earlier), and the only fix is to replace the whole assembly.
Bookmarks