Results 1 to 9 of 9
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    May 2011
    Location
    cleveland
    Posts
    78
    Rep Power
    27

    MPC4503 curling and jamming with internal finisher

    We put a bridge unit and sr3140 on and its been working fine. we updated finisher and are looking for the part number for anti-condensation heaters that were refered to in other posts regarding this problem. Im having no luck finding part number or EDP code if its an option. Has anybody ordered these for the 3503 series? if so do you have a number or were you found it? Thanks

  2. #2
    Senior Tech 2,500+ Posts
    MPC4503 curling and jamming with internal finisher

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,920
    Rep Power
    99

    Re: MPC4503 curling and jamming with internal finisher

    It should be in the Parts Catalog under accessories.
    NEVER ASSUME ANYTHING

  3. #3
    Service Manager 1,000+ Posts
    MPC4503 curling and jamming with internal finisher

    nmfaxman's Avatar
    Join Date
    Feb 2008
    Location
    Albuquerque
    Posts
    1,706
    Rep Power
    68

    Re: MPC4503 curling and jamming with internal finisher

    I have taped dehumidifier packs into each drawer.

    Not a permanent fix, but it helps if the spend another dollar per case of paper.

    Worth a try and cheaper than kits.
    Why do they call it common sense?

    If it were common, wouldn't everyone have it?

  4. #4
    Retired 10,000+ Posts
    MPC4503 curling and jamming with internal finisher

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: MPC4503 curling and jamming with internal finisher

    They are shown on the Point to point diagram. The service manual for the MP C2003/2503 covers the installation. It gives some of the part numbers for the scanner and drum heaters. On quick scan, I did not see any numbers for the tray heaters, but they might be the same as used on older models.

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    May 2011
    Location
    cleveland
    Posts
    78
    Rep Power
    27

    Re: MPC4503 curling and jamming with internal finisher

    Thansks I got number from collegue it is D186-0402 I will let you know if it works
    Quote Originally Posted by dpoutz View Post
    We put a bridge unit and sr3140 on and its been working fine. we updated finisher and are looking for the part number for anti-condensation heaters that were refered to in other posts regarding this problem. Im having no luck finding part number or EDP code if its an option. Has anybody ordered these for the 3503 series? if so do you have a number or were you found it? Thanks

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    May 2011
    Location
    cleveland
    Posts
    78
    Rep Power
    27

    Re: MPC4503 curling and jamming with internal finisher

    D186-0402 is the number thanks
    Quote Originally Posted by slimslob View Post
    They are shown on the Point to point diagram. The service manual for the MP C2003/2503 covers the installation. It gives some of the part numbers for the scanner and drum heaters. On quick scan, I did not see any numbers for the tray heaters, but they might be the same as used on older models.

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    May 2011
    Location
    cleveland
    Posts
    78
    Rep Power
    27

    Re: MPC4503 curling and jamming with internal finisher

    thx
    Quote Originally Posted by nmfaxman View Post
    I have taped dehumidifier packs into each drawer.

    Not a permanent fix, but it helps if the spend another dollar per case of paper.

    Worth a try and cheaper than kits.

  8. #8
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,662
    Rep Power
    63

    Re: MPC4503 curling and jamming with internal finisher

    Quote Originally Posted by nmfaxman View Post
    I have taped dehumidifier packs into each drawer.

    Not a permanent fix, but it helps if the spend another dollar per case of paper.

    Worth a try and cheaper than kits.
    I do the exact same thing...when we unbox new machines I collect the large silicon gel packs and use them in machines located in humid areas.

  9. #9
    james024
    Guest

    Re: MPC4503 curling and jamming with internal finisher

    Quote Originally Posted by dpoutz View Post
    We put a bridge unit and sr3140 on and its been working fine. we updated finisher and are looking for the part number for anti-condensation heaters that were refered to in other posts regarding this problem. Im having no luck finding part number or EDP code if its an option. Has anybody ordered these for the 3503 series? if so do you have a number or were you found it? Thanks






    I found the 2 mylars on the internal finisher exit are causing the paper to curl downwards. Rip these off and problem solved.....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here