Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Nov 2014
    Posts
    5
    Rep Power
    0

    Question Web Interface stopped working on Ricoh Aficio MP 2500

    Hi

    I had setup a "shortcut" to scan directly to a shared folder, and the user account password for that share was changed so the scanning gave an authentication error. Even though I changed the password back to the previous value, it is still not working.

    I tried to go to the web interface (http://192.168.0.x/) and I just get a 404 error.

    I tried:
    1. going into the service menu (yellow clear, 1, 0, 7, hold red cancel)
    2. press 1 for copier
    3. press 5 for "mode"
    4. I ensured the web interface was set to enabled (1). Set it to 0 then back to 1.
    5. Cleared memory for "GWWM"


    This had no effect. Any ideas on this? I'd even be open to factory reset and/or upgrade firmware if available and reset.

    Firmwares are Printer 1.04, System 1.04, Engine 1.04:02, NIB 6.14

  2. #2
    Service Manager 2,500+ Posts
    Web Interface stopped working on Ricoh Aficio MP 2500

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: Web Interface stopped working on Ricoh Aficio MP 2500

    I'm assuming that there is no issue with printing. Correct?
    Have you tried logging in from multiple PC's with same result?
    Have you tried connecting the machine directly to a laptop to eliminate network issues?
    Try resetting system settings to default: User tools/ (down to) system settings/ Hold # and press "OK". Select 'yes" when prompted to reset settings.
    Then reset IP address, etc, and try to log in

  3. #3
    Junior Member
    Join Date
    Nov 2014
    Posts
    5
    Rep Power
    0

    Re: Web Interface stopped working on Ricoh Aficio MP 2500

    No issue with printing. I can scan to folder if I browse and manually enter user/password. It still shows an error but the file is saved in the folder.

    I didn't try multiple PCs or connecting directly because 404 error tells me it is contacting the web server

  4. #4
    Retired 10,000+ Posts
    Web Interface stopped working on Ricoh Aficio MP 2500

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: Web Interface stopped working on Ricoh Aficio MP 2500

    Quote Originally Posted by trueimage View Post
    No issue with printing. I can scan to folder if I browse and manually enter user/password. It still shows an error but the file is saved in the folder.

    I didn't try multiple PCs or connecting directly because 404 error tells me it is contacting the web server
    Yes but the security software on the computer could be blocking the content of the page.

  5. #5
    Junior Member
    Join Date
    Nov 2014
    Posts
    5
    Rep Power
    0

    Re: Web Interface stopped working on Ricoh Aficio MP 2500

    Quote Originally Posted by slimslob View Post
    Yes but the security software on the computer could be blocking the content of the page.
    I will certainly check it tomorrow. Assuming that isn't the issue, is there anything I should check or clear on the Ricoh?

  6. #6
    Senior Tech 100+ Posts
    Web Interface stopped working on Ricoh Aficio MP 2500

    nobody-here's Avatar
    Join Date
    Mar 2008
    Posts
    234
    Rep Power
    38

    Re: Web Interface stopped working on Ricoh Aficio MP 2500

    If your trials with other PC won't success check this:

    Connect to machine via telnet
    check if Web interface is on with command "show"
    if not, try to configure via "web" command.

    ----

    Try to upgrade or reload Firmware.

    See you!
    29 rouge unpair manque.... cous cous....

  7. #7
    Junior Member
    Join Date
    Nov 2014
    Posts
    5
    Rep Power
    0

    Re: Web Interface stopped working on Ricoh Aficio MP 2500

    Quote Originally Posted by nobody-here View Post
    If your trials with other PC won't success check this:

    Connect to machine via telnet
    check if Web interface is on with command "show"
    if not, try to configure via "web" command.

    ----

    Try to upgrade or reload Firmware.

    See you!
    I will try this. is telnet wide open or is there a default login/password?

    I cannot find any guides on how to update firmware or what the latest version is or where to download it for this model.

  8. #8
    Geek Extraordinaire 2,500+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    3,949
    Rep Power
    126

    Re: Web Interface stopped working on Ricoh Aficio MP 2500

    From a command prompt, enter: telnet <ip address of copier>.

    User name should be: admin (lower case)

    There should be no password, so press Enter.

    Type "set web up" (no quotes).

    Close window

    Also, what browser are you using? IE 11 won't connect unless it's in compatibility mode. This is a common problem with Windows 8, Server 2008 and Server 2012.
    “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

  9. #9
    Retired 10,000+ Posts
    Web Interface stopped working on Ricoh Aficio MP 2500

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: Web Interface stopped working on Ricoh Aficio MP 2500

    Quote Originally Posted by KenB View Post
    From a command prompt, enter: telnet <ip address of copier>.

    User name should be: admin (lower case)

    There should be no password, so press Enter.

    Type "set web up" (no quotes).

    Close window

    Also, what browser are you using? IE 11 won't connect unless it's in compatibility mode. This is a common problem with Windows 8, Server 2008 and Server 2012.
    Another reason why I use Firefox.

  10. #10
    Junior Member
    Join Date
    Nov 2014
    Posts
    5
    Rep Power
    0

    Re: Web Interface stopped working on Ricoh Aficio MP 2500

    It was Google Chrome

    Will try these suggestions, I will be on site in the next day or two.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here