Hi Guys, I have a MPC8002 with tandem tray issues. Once the RH side of the tray runs out of paper the LH side starts feeding paper over to the RH side as per normal, but the paper is only moved about 30mm towards the RH side. The lift tray then raises thinking the paper has been transfered over, which of course it hasn't. There is no delay or slipping of the LH side rear fence which drives the paper across and the paper is not catching on anything, it appears the machine is just screwed up with it's timing. The result is an error saying the paper is over it's limit mark. I've actioned the tech bulletins and updated all the firmware. Any ideas?
Bookmarks