Check the mylar guides before the registration roller. I had one fall off the other day causing skewing and jams. Also lots of noise from the paper hitting. I used two sided moulding tape from the auto parts store to reattach it.
I hope this helps you out
Be careful using cheat sheets!
They changed the parts on these machines as they progressed through 1065/ 75, into 2075 and then into the 6000 series. At one point the mylars changed, can't remember when, but be sure! Ive had guys order the wrong parts before and it's a bugger when you only find out with the reg unit on the bench.
Apart from duplex clutch everything is motor driven.
Networking skills are advantageous but use of a 3m vacuum cleaner is essential
Bookmarks