Greetings all, I have a problem on this multifunction SC 442 can someone give me a hint on what to do? thanks
Greetings all, I have a problem on this multifunction SC 442 can someone give me a hint on what to do? thanks
SC442
Dirty image transfer belt contact sensor
Defective image transfer belt contact motor
Disconnected connector of image transfer belt contact sensor or motor
Disconnected cable
1. Replace the image transfer belt contact sensor.
2. Replace the image transfer belt contact motor.
Totoro
thanks totoro, I change the transfer belt, and all drum unit, but this problem remain, it seems that the belt does not run
thank's sandmanmac, I disassembled the back and saw that the engine belt does not turn, can be a problem to which card?
anyone has any photos of this contact sensor / motor which is positioned
C3000 - ITB Contact motor.pdf
You can check the motor with SP5-804-001
hi sandmanmac, I run the display 5-804-001 ON but the engine belt is not moving the copier have 180000 print
It's not the belt motor, it's the contact motor. It sits on it's own on the top right of the main drive unit.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
hi tonermunkeh, you can tell me exactly where I'm going crazy, I have to remove the back?
Bookmarks