functional problem in pro 907EX

[mikadonovan]

Doing SP 5801-001 will reset SP 5875-001 to 0. You are still getting an SC 495 only it is no longer being displayed.

Slim, you can only tell him that so many times. Methinks not all of it is sinking in

[imaginemoko]

it would be really helpful if you have background on previous Bellini Machine Sir, anyhow i would suggest to check first the toner bottle at toner bank check if its stone replace it happens to be, then clean(vaccum) the toner hose/pipe (cylinder to toner pump) its more effcient if your remove it out then clean it but you are require to remove the dev fan and the toner pump motor and the fly wheel of course. after replacing the toner and cleaning, and assembled the machine run the toner bank set up sp 2207-2 like 5 to 7 mins after its completed check sp 5813-18 = 00000110 atleast it should be the value of if you have succeded in the process of setting up toner at your machine. there a still more possible ways to solve the SC 495 but try this one first Sir may be it could solve your problem... good luck ya sallam.