Results 1 to 10 of 10
  1. #1
    Senior Tech 250+ Posts Zaxxon's Avatar
    Join Date
    Jan 2014
    Posts
    401
    Rep Power
    19

    Ricoh MP C3003 SC540-00

    Hi yall

    Got this MP C3003 throwing sc540-00

    Done:

    1. FW updated
    2. Fusing Unit changed
    3. Fusing Drive motor changed
    4. Connector for fusing incl. harness (the machine part) changed
    5. Rotate sensors changed
    6. IOB (Transport - D1495120) changed

    with no luck... HEEEEELP or at least give me some free firmware (just joking)

    Any clue?

    EDIT: Forgot to say it is a periodic error... in between it runs great.

    Last edited by Zaxxon; 02-11-2015 at 12:21 PM. Reason: Forgot to say it was periodic

  2. #2
    Field Supervisor 500+ Posts Zeldaman's Avatar
    Join Date
    Mar 2011
    Location
    Stuttgart/Baden Wuerttemberg
    Posts
    761
    Rep Power
    29

    Re: Ricoh MP C3003 SC540-00

    Hi there!
    After all parts you changed i think the problem is the BCU. If the fusing driveīs going easy itīs the only part that cause that problem.
    Greetings...


  3. #3
    Service Manager 1,000+ Posts
    Ricoh MP C3003 SC540-00

    Lagonda's Avatar
    Join Date
    Aug 2008
    Location
    Brisbane
    Posts
    1,454
    Rep Power
    53

    Re: Ricoh MP C3003 SC540-00

    Hey Zaxxon,
    What fixed your SC 540 error? Was it the BICU?
    I've got one doing exactly the same thing, thrown every thing at it but is still intermittently SC 540's.
    It's very embarrassing as its an in-house machine

    At least 50% of IT is a solution looking for a problem.

  4. #4
    Senior Tech 250+ Posts Zaxxon's Avatar
    Join Date
    Jan 2014
    Posts
    401
    Rep Power
    19

    Re: Ricoh MP C3003 SC540-00

    I've changed the complete harness (for the drive) and the fusing drive unit (was not sure if my colleague did actually change this)

    It is a 3-4 hours job, but did the trick for this little devil.


  5. #5
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba
    Posts
    1,199
    Rep Power
    35

    Re: Ricoh MP C3003 SC540-00

    We just fixed a 2503 that was throwing "SET FUSING UNIT CORRECTLY" intermittently to begin with and then constantly.
    It also turned out to be the harness between the machine side plug and the Transport IOB.
    Seems like some numpty is over tightening the cable ties in the factory


  6. #6
    Field Supervisor 500+ Posts Polarbear's Avatar
    Join Date
    Feb 2012
    Location
    Cape Town
    Posts
    907
    Rep Power
    29

    Re: Ricoh MP C3003 SC540-00

    Quote Originally Posted by Oze View Post
    We just fixed a 2503 that was throwing "SET FUSING UNIT CORRECTLY" intermittently to begin with and then constantly.
    It also turned out to be the harness between the machine side plug and the Transport IOB.
    Seems like some numpty is over tightening the cable ties in the factory
    I think Ricoh must write off cable ties totally, as the new internal finisher in the MPC range, keeps breaking its staple loom, right where the cable ties are....

    MP171 ADF cable ring a bell? Same cable tie rubbish design.

    Press the GREEN button!!

  7. #7
    Service Manager 1,000+ Posts
    Ricoh MP C3003 SC540-00

    Lagonda's Avatar
    Join Date
    Aug 2008
    Location
    Brisbane
    Posts
    1,454
    Rep Power
    53

    Re: Ricoh MP C3003 SC540-00

    Thanks for the quick replies Guys, I'll try a bit of delicate surgery with the side cutters, snip the cable ties and relieve the pressure on the loom.
    Don't want to spent too much time on it as it belongs to the Managed Information Service crew who are doing their best to put us all out of a job by promoting paperless offices.
    In fact if they are so dedicated to electronic storage of documents why do they want a copier at all?

    At least 50% of IT is a solution looking for a problem.

  8. #8
    Junior Member
    Join Date
    Jul 2016
    Location
    Nam Định
    Posts
    3
    Rep Power
    0

    Re: Ricoh MP C3003 SC540-00

    I thinks, you need to sc reset.


  9. #9
    Service Manager 1,000+ Posts
    Ricoh MP C3003 SC540-00

    Lagonda's Avatar
    Join Date
    Aug 2008
    Location
    Brisbane
    Posts
    1,454
    Rep Power
    53

    Re: Ricoh MP C3003 SC540-00

    Quote Originally Posted by Quochoi View Post
    I thinks, you need to sc reset.
    Reset with SP 5810 every time it fails. Then runs for 8 to 10 days before it fails again.

    At least 50% of IT is a solution looking for a problem.

  10. #10
    Service Manager 1,000+ Posts
    Ricoh MP C3003 SC540-00

    Lagonda's Avatar
    Join Date
    Aug 2008
    Location
    Brisbane
    Posts
    1,454
    Rep Power
    53

    Re: Ricoh MP C3003 SC540-00

    Fixed it, a new IOB did the trick. Run for two weeks now without problems.

    At least 50% of IT is a solution looking for a problem.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here