Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Location
    baghdad
    Posts
    124
    Rep Power
    0

    problem with mpw2200

    hi all

    the problem with ricoh mpw2200 is give me the massege (front cover is open )

    i checked the right switch door in input check and its ok its

    and i checked front pre sensor and its also ok and work properly

    but when i checked the left switch door in input check the last digit (ooooooo1) the digit (1) never change to (0) like (right switch or another sensor )

    and i checked all connector \ its ok

    any one can help me please

    best regards

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Location
    baghdad
    Posts
    124
    Rep Power
    0

    Re: problem with mpw2200

    HELLOW

    ANY BODY HERE?

  3. #3
    Retired 10,000+ Posts
    problem with mpw2200

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: problem with mpw2200

    Quote Originally Posted by en. View Post
    i checked the right switch door in input check and its ok its

    when i checked the left switch door in input check the last digit (ooooooo1) the digit (1) never change to (0) like (right switch or another sensor )
    If this information does not tell you where the problem is, you are not a tech. Either that or you need to find a new line of work. Hire a qualified technician.

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Location
    baghdad
    Posts
    124
    Rep Power
    0

    Re: problem with mpw2200

    Thank sir for your advice to find anew line work >>>

    i replace all switch door and checked the connection and wiring >>all this is ok and work properly

    but the message is still ( front door open )

    any one can guide me how to reset or resolve this problem

    best regards

  5. #5
    Service Manager 1,000+ Posts Polarbear's Avatar
    Join Date
    Feb 2012
    Location
    Cape Town
    Posts
    1,070
    Rep Power
    45

    Re: problem with mpw2200

    There is a problem with your model number: It is either an mpCw2200 or MPW2400 as I cannot find a MPW2200 anywhere.Please correct this then we can attempt to help you.
    Press the GREEN button!!

  6. #6
    Service Manager 100+ Posts Moza's Avatar
    Join Date
    Feb 2009
    Location
    UK
    Posts
    232
    Rep Power
    34

    Re: problem with mpw2200

    See my response in the thread below


    Ricoh MPC W2200 wide format

  7. #7
    Trusted Tech 50+ Posts vga_man's Avatar
    Join Date
    May 2013
    Location
    Banha
    Posts
    78
    Rep Power
    0

    Re: problem with mpw2200

    i've the same problem later but i checked the door sensor and cleaned it

  8. #8
    Technician
    Join Date
    Feb 2015
    Location
    colombo
    Posts
    19
    Rep Power
    0

    Re: problem with mpw2200

    hi all,
    I have face same problem still no soluation. I have worte to ricoh As per they advice i have change the print head colour and black, MCU BOARD ,HRD BOARD, POWER SUPPLY BOARD, still the same......

    the problem with ricoh mpw2200 is give me the massege (front cover is open )

    i checked the right switch door in input check and its ok its

    and i checked front pre sensor and its also ok and work properly

    but when i checked the left switch door in input check the last digit (ooooooo1) the digit (1) never change to (0) like (right switch or another sensor )

    and i checked all connector \ its ok

    any one can help me please

    best regards[/QUOTE]

  9. #9
    Technician
    Join Date
    Feb 2015
    Location
    colombo
    Posts
    19
    Rep Power
    0

    Re: problem with mpw2200

    Hi all,
    I have installed MPCW2200 machine more then 20. most of the machine we are facing problem paper jam. any body facing same problem please let me know. I have updated the latest faimware and some machine i have replace ENCORDE STRIPPER temporary machine will work.

  10. #10
    Technician 250+ Posts Ricoh-ono's Avatar
    Join Date
    Feb 2008
    Posts
    325
    Rep Power
    39

    Re: problem with mpw2200

    Check the ribbon cables near the Print Head. Tech Service Bulletin 8 covers this.
    Most often this occurs because there was a loss of the 5v trigger which comes from the print heads through to the
    MCU Board. This 5v line is used by the MCU to turn on the 37 volts coming from the Power Supply and going
    through the Front Cover Door Switches.
    Do what you can, with what you have, where you are. ~Theodore Roosevelt

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here