savin C3535-Ricoh C3500 power supply problems

[odie]

Working on a Savin C3535.
This one received damage to the rear panel. Found that the power supply
(Ricoh AZ240109) was damaged, cracked board. I repaired board soldering wire
leads over the crack in the board. and reinstalled the board.

My question, the unit still does not power up. Fuses are all ok. Can hear a relay type click from board
when power switch is turned on. I don't have a service manual for this copier. Is there a physical reset I have to
preform after the power supply board is installed?

The board may still be damaged and is causing the problem, if so does anyone have a used AZ240109 board to sell

[sandmanmac]

If the board (S) were 'ok', then quite simply the machine would power up

[ZOOTECH]

Working on a Savin C3535.
This one received damage to the rear panel. Found that the power supply
(Ricoh AZ240109) was damaged, cracked board. I repaired board soldering wire
leads over the crack in the board. and reinstalled the board.

My question, the unit still does not power up. Fuses are all ok. Can hear a relay type click from board
when power switch is turned on. I don't have a service manual for this copier. Is there a physical reset I have to
preform after the power supply board is installed?

The board may still be damaged and is causing the problem, if so does anyone have a used AZ240109 board to sell

Quite possibly the circuit board is multi-layered, and you missed a trace or two.

[TonerMunkeh]

Recycled Parts have them, they're about $120. Just Google the part number.

[odie]

Got it working.

Replaced power supply board with new one.
works good now