Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    MPC255 Image Fading Out


    Join Date
    Mar 2015
    Location
    Tyler, Texas
    Posts
    22
    Rep Power
    8

    MPC255 Image Fading Out

    Intermittent problem, image fades out to blank, or almost blank, towards the front of the machine, looks perfect towards the rear. Happens in full color or in B/W modes. Happens whether copying or printing. Then might clear up perfectly for a few pages, then WHAM, starts fading out again. Pulled and inspected all IU's, xfer roller, and xfer belt unit, no apparent issues with them. Held transport unit door closed tightly, no help. Suspect bad xfer belt unit, but don't have spare to test with.
    Thanks for any suggestions!



  2. #2
    Technician
    MPC255 Image Fading Out


    Join Date
    Mar 2015
    Location
    Tyler, Texas
    Posts
    22
    Rep Power
    8

    Re: MPC255 Image Fading Out

    Correction to model number: MPC2500. I don't know how that happened! LOL


  3. #3
    The New Guy 1,000+ Posts ruben's Avatar
    Join Date
    Oct 2012
    Location
    Bristol, UK
    Posts
    1,204
    Rep Power
    45

    Re: MPC255 Image Fading Out

    Make sure the PTR sits properly in its holder, it is held in place with two plastic clips, sometimes these break. You may need to replace the case, B223 6281, and possibly PTR, B238 6260. If you pull slightly on the PTR it should stay in place, if it moves replace the case. If the roller looks worn or has white patches, replace the roller.

    Also, check that the door has only a slight movement to it.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here