Thanks: 
Likes: 
Dislikes: Mp6001 type controller is not the same with 8001?
Why will appear in 995-995?
Mp6001 type controller is not the same with 8001?
Why will appear in 995-995?
The controllers are not the same. SC995, is a controller mismatch error.
That there's no way to put the controller fitted with 9001 above 6001?Originally Posted by ruben
My 8001 print controller is broken.
Should be the same controller.Why don't you like?
No they are not. A number of boards in this model series vary according to the model speed. The power supply unit, BCU and CNB are different for the 9001. For the DRB the 6001 and 7501 are the same and the 8001 and 9001 are the same.
The control board is the same for the 6001 and 7501. The 8001 and 9001 each have separate part numbers:D062 5607 PCB: D062: Service: DOM/EXP: Ass'y
D063 5507 PCB: D063: Service: DOM/EXP: Ass'y
D065 5505 PCB: D065: Service: Ass'y
D066 5506 PCB: D066: Service: Ass'y
I see that in the time it took for me to look up and post the above, 3 others also replied.
You're should be 6001 and 7001 are the same.Rather than MPC7501
Yes, because I have installed over 6001 8001 BCU, DIP switch is not the same.
But I no control panel.
Because I ricoh order is very expensive in China.And the time need a month.
The factory pattern can be installed?
You have already been told IT WILL NOT WORK! What else do you need to know. Look in the parts manual and order the correct part.
因为我没有多余的控制器。
而我的8001的bcu可以装到6001上面。
我只是需要改变他的dip开关。
我没有他的零件手册和订单编号。
我是属于旧复印机维修。
Because I do not have the extra controller.
And my bcu 8001 to 6001 can be installed on it.
I just need to change his dip switches.
I do not have his parts manuals and order number.
I belong to the old copier repair .
Mystic Crystal Revelations
Thank you help me to correct grammatical errors.
Posting Permissions
Reply With Quote
Bookmarks