Hi, All. I am working on this toner scattering beast, and wondered if anyone has seen this particular problem. Here's the situation. I had magenta dropping toner everywhere, so I put new blades, brush, lube bar and drum into the pcu. I ran 50 magenta horizontal band test prints on 8 1/2 x 11 with no problems at all. When I ran the customers job on 11x17 80lb stock, these globby magenta splotches show up on 3 or 4 out of ten. Spill plate is clean. I'll be danged if I can identify the problem with the magenta PCU. Everything looks good.
Bookmarks