mpc4503 sc 271-70

[en.]

hi all

i have this problem with ricoh mpc4503 its give me SC 271-70

i reset the machine and turn off but the code is still

i searched this SC in troubleshooting but i didn't find any think

any one can help me please

[TonerMunkeh]

hi all

i have this problem with ricoh mpc4503 its give me SC 271-70

i reset the machine and turn off but the code is still

i searched this SC in troubleshooting but i didn't find any think

any one can help me please

Do you mean 721-70?

[slimslob]

If it is 721-70 it has to do with tray1 lift.

[Imprestik]

I thought SC721-70 was related to the finisher shift tray paper height sensor....

There is a harness that has not been routed properly and the end of the sensor catches on it causing this issue...

There is a bulletin on this service code if your finisher is a SR3150/SR3160

[slimslob]

If it is 721-70 it has to do with tray1 lift.

I thought SC721-70 was related to the finisher shift tray paper height sensor....

There is a harness that has not been routed properly and the end of the sensor catches on it causing this issue...

There is a bulletin on this service code if your finisher is a SR3150/SR3160

The service manual just says Tray 1 lift but it probably is shift tray 1 on the finisher.