Ricoh Sp c811 have a sc548 i tried to change everything: Fuser,IH inverter board,I/O board ,interface board, Power Board , Fuser motor
and no response .
Ricoh Sp c811 have a sc548 i tried to change everything: Fuser,IH inverter board,I/O board ,interface board, Power Board , Fuser motor
and no response .
That is a level "A" code. It must be reset using SP 5810.
NEVER ASSUME ANYTHING
I did it in every step I did
SC 548 Fuser unit rotation error - check condition of star wheel actuator SC 548 Fuser unit rotation error - check/clean/replace rotation sensor (SP5-803-34 to check) SC 548 Fuser unit rotation error - sensor out of holder, reinstall SC 548 Fuser unit rotation error - sensor bracket bent , check and repair
Untitled-1.jpg
you mean the "C" one in the photo?
Bookmarks