You could try desconnecting it to see what happens, I had a MP1350 an upgraded model of yours and when the finisher tray did not reach home possition, the green operators display light would indicate ready or printing and nothing was being printed, and the display said Printing and there was no activity.Originally Posted by Oscar57
We can all Win, but at the end we all loose. Save the greyhound
Yes it has 2 different finishers and it does it with either one hooked to it.
Did you ever get light or gray copies
No the print quality is excellent. It just stops printing but the copier thinks it still is. If I reboot copier it will work again for a while, then it will do it again.
Is your Drum in it´s life time limit, maybe the machine is trying to process control it self and it stops, our machines do this, if you didn´t know?
Last edited by iMind; 06-27-2008 at 12:50 AM.
Had one calling codes, rebooting and losing time once the drum shaft and earth cleaned up all was good again.
But like you say best to start with the drum and pro con senstive parts to see if they are ok.
Hello i had a problem similar to your's and it turned out to be bad HDD's they are connected as an "assy" with to disks and depending on what file i was printing/copying it Froze in Copying,i tried Print /Copying /Document server.After new HDD assy it worke'd fine.
You said you already replaced the hdd.Did you replaced both hdd.If not.Its a standard procedure when replacing hdd to replace both hdd.
Yes, I replaced both hard drives.
Can I know what is the version of your firmware.
Posting Permissions 
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks