lanier 5025 service mode to reset keyopp pass

[JasonW]

Lanier 5025 service mode or manual please I never work on these, and forgot how to get in service mode. I know its some crazy program interrupt clear 0 combo but i forgot the exact order

My company lost the key operator code, guessed everything in the world it could be and still no luck. I have to figure out how to reset / clear it in service mode.

Thank you _so_ much.

Jason W.
Jason@BestOfficeProducts.org

[tcs04]

	Quote:			Originally Posted by JasonW
	Lanier 5025 service mode or manual please I never work on these, and forgot how to get in service mode. I know its some crazy program interrupt clear 0 combo but i forgot the exact order My company lost the key operator code, guessed everything in the world it could be and still no luck. I have to figure out how to reset / clear it in service mode. Thank you _so_ much. Jason W. Jason@BestOfficeProducts.org

C all / 1 0 7 / C stop
(Yellow) (Red)
Then try SP mode 7-810 (See attached) I would suggest using something like the last 4 digits of the serial number or your office phone number as the key op code!

[Scott_Lewis]

Try logging in as an administrator using the default name/pw.

[JasonW]

Still can't get into SP mode. I don't understand your C all / 107 / c stop. I tried it several different ways and it didnt work. I got into SP before, about a year ago, and i remember having to hit program interrupt.

Can you explain it again, I'm sorry. Thank you so much. I know techs only help those that help themselves, I just cant find any info on entering service mode!

[TonerMunkeh]

Press yellow, type in 1 0 7 then press and hold red.

[JasonW]

perfect! thank you so much.

I actually did reset the key code with the five beeps. your doc was so helpful. Reason I'm doing this is to change the Fax RX Terminal ID and Fax number. I got the ID changed but I cant find the stupid fax number.

[Scott_Lewis]

	Quote:			Originally Posted by JasonW
	perfect! thank you so much. I actually did reset the key code with the five beeps. your doc was so helpful. Reason I'm doing this is to change the Fax RX Terminal ID and Fax number. I got the ID changed but I cant find the stupid fax number.

Try Key Op settings, G3 Analog Line

[tcs04]

	Quote:			Originally Posted by JasonW
	perfect! thank you so much. I actually did reset the key code with the five beeps. your doc was so helpful. Reason I'm doing this is to change the Fax RX Terminal ID and Fax number. I got the ID changed but I cant find the stupid fax number.

Lucky you didn't try the other way, could have been trouble!!

[Jerry Chavez]

Can someone please help me access the Lanier 1210 mfd (multi-function device, fax, scanner, printer) service mode?

I need to reconfigure device to TEL/FAX, and it can only be done from service mode.