MP 2000le

[YHEL23]

Good day to all,

I have a 2 unit of this model always give me a problem sc 500, i already replaced the main motor. by after 3 months the code come out again. now i replaced again motor, but i dont know till when can long last. any idea why this happen? Thanks in advance.

Yhel23

[Eric1968]

There is probably too much load on the gears. See if all the gears can run smoothly.

[YHEL23]

There is probably too much load on the gears. See if all the gears can run smoothly.

Thanks for your advice, i will try it. before the new brushless motor will faulty again.

[schooltech]

Yeah, there is something causing that motor to burn up. In most instances, motors don't go bad, so when they do some extra load or a bad board takes them out. Make sure that there isn't a cracked gear or a worn-out idle gear shaft or something that works OK but is probably causing the binding.