savin 8090 w-adf going crazy

[T911]

place an original in the adf and the table goes up and down, up and down, cleaned and swapped sensors checked continuity throughout the harness ok. now after putting it back together the only response i have is the door sensor. tested sensors in sp and the only one it can see is the door sensor. ideas appreciated. thanks t

[Kopyrtek]

Ricoh has an ADF kit (B2349825) that includes a longer sensor harness and wire saddles.Has a bulletin(#44) out on this issue.

[T911]

it was the harness for the table thanks t