MP9000 Firmware f-up

[Voltage]

Hope someone can help me!!

I have updated the firmware on a MP9000 to

Engine from B2345223L to D1015223C
System/Copy from B2345541L to D1015541E

Now my Printer options is now gone, and i am sure it takes longer to go into the Copier option in the SP modes.

Any advise will be appreciated.

[iMind]

Your machine is now a Pro series, you´ll have to update all the remaing firmware I think its about 9 or 10. LCDC will take up to 25 to 40 minutes don´t switch off the machine.

[pocket aces]

You have to upgrade everything on the 9000 1100 1350 listen to Imind

[Voltage]

You have to upgrade everything on the 9000 1100 1350 listen to Imind

No only those 2. Downloaded all off them and are going to upgrade it tomorrow morning. I can find the BIOS firmware on TESSA. Is it necessary to upgrade that too?

[iMind]

Bios are on board, it will certainly be possible at the factory.

OK boetie, update all the rest and remember that the LCDC will take some time as said on my first post, don´t switch off the machine there will appear big black blocks on the screen it will look like the machine has stalled but just wait so you don´t have to order news boards.

[Voltage]

Bios are on board, it will certainly be possible at the factory.

OK boetie, update all the rest and remember that the LCDC will take some time as said on my first post, don´t switch off the machine there will appear big black blocks on the screen it will look like the machine has stalled but just wait so you don´t have to order news boards.

Where did you learn the word "boetie" You South African?

i have seen that the LCDC takes forever. Did get a bit suspicious after 20min

[iMind]

No reply, file not found...

[Voltage]

Thanks iMind. Problem solved

Upgraded all the firmware and Bobs your auntie.