ricoh 3035 jamming

[wings]

i had this problem with 40 copies than it was jamming, replaced the 2 motors an solenoids but kept comming back, when on the data say's duplex exit it is most of the time this sensor.

[mikadonovan]

Is it only jamming when on duplex. Maybe it's the pads on the solenoids for the exit junction gates.

Most likely.

[wings]

you mean the litle cusions on the solenoid in the paperseperation unit, over the fuser? then it won't go in the duplex, had that today!

[mikadonovan]

I think the reference is to the pads on the guides themselves to reduce noise. They get too hot and melt into a sticky mess and the solenoids try to fire but can't move the guides because they are stuck.