| Pre-holed paper
Hey, I know this is a classic... (it's pretty much the same problem as when using logotype paper).
A customer of mine with an MPC2050 are using pre-holed paper. Don't know if you guys use that kind of paper but over here it's pretty much standard, to our disadvantage. It's a b**ch trying to get it right every time and this time is no different.
You know how the copies become different if you copy from the feeder or if you copy from the glass? It's logical enough, since the scanner reads from left-to-right from the feeder and from right-to-left from the glass. In this case it's a problem and the only solution would be to make the scanner read from left-to-right when copying from the glass as well, but is there a way to do this? | 
Linear Mode
