MPC - 7500 Tray Heater connection

[manna]

Can any one connected Heater tray factory setting it is not connected
and SM says need to connect while copier in high humid condition.
I try to connect it as per SM but i could't find HTA5 & HTA6 connector.
is any one have any idea that after connecting this will reduce paper
jamming.

[Jomama46]

They are the only unconnected connectors on the power board. Of course, you have to install the heaters.

[manna]

	Quote:			Originally Posted by Jomama46
	They are the only unconnected connectors on the power board. Of course, you have to install the heaters.

You mean heaters are not connected as per SM that's i think true
no heater their so i will have to purchase heater and to install.
Is any advantage in after heater installation in humid and normal
condition.

[Jomama46]

You got it. The disadvantage is that in normal envirns, it may dry the paper out and give yo curling and other problems. If the room is not huge, it may be better to install a portable dehumidifier.

[manna]

	Quote:			Originally Posted by Jomama46
	You got it. The disadvantage is that in normal envirns, it may dry the paper out and give yo curling and other problems. If the room is not huge, it may be better to install a portable dehumidifier.

Thanks really it is better to go for dehumidifier because room is small.