Ricoh 1224c Networking

[azakbar]

Where can I get scanrouter pro from and how much does this cost?

As long as it saves scanned documents and faxes onto the pc, that is all we need.

[azakbar]

ok, Ive installed scanrouter v2 lite and found the copier ip address. Ive added a user and selected scan to file. Ive disabled firewall- all ok.

When i go to the scan function on the copier it says that the destination list has failed.

Ive gone into the system maintenance and into 'delivery' and turned it on, but it wont allow me to change the ip address.

[Fearless V K]

Delivery IP address should be the IP of the computer you have Scanrouter loaded on, and it should get this address automatically if Scanrouter has been configured correctly, and ALL required ports and exceptions have been enabled. If it is not getting it, there is still a roadblock somewhere. Could even be A/V software, or hardware firewall if there is one.

[teebee1234]

On the 1224c you can manually change the delivery server address in the service SP mode only, not user tools.(Scanner sp I believe). Make sure you have scanrouter loaded on a pc with a static address (ideally a server) or you're going to get connection failures when that pc gets a new address somewhere down the road.
As Notorious stated, if all settings are correct then most likely the problem is firewall/anti-virus. Norton and Mcaffee are notorious for that, just add an exception for the ip of the mfp.
You didn't mention it but I assume the delivery server has admin rights with login and p/w? That's also required for scanrouter.

[onyda digital]

	Quote:			Originally Posted by azakbar
	Im hoping someone can help! We've got a Ricoh 1224C Photocopier and are having problems trying to network it using an ethernet cable. Ive manually entered the IP address on the copier, but the pc doesnt pick up the copier. The message 'check ip address' keeps appearing on the copier. Would be very grateful if someone could go through the process of setting up the network. The copier comes with scanner, fax and print. Ive also been told that we might need software. We didnt get a manual nor software with the copier. We are running windows xp Thanks

ping the copier from the computer. check your router. ip address of copier must coencide with gateway addres eg. 192.168.0.1 may be your gateway then give your copier an address to something like 192.168.0.100